Ericsson  |  Fitel  |  Fujikura  |  Sumitomo

Net test | EXFO | Agilent | Fluke | Noyes | Anritsu | JSDU | TEktronix | corning

 
 
     
 
 
 

Fujikura : FSM-30R


Description: The new Fujikura FSM-30R12 brings a new level of productivity and capability to mass fusion splicing. The well proven and market leading mass fusion splicing technology of previous Fujikura mass splicers is now provided in an extremely small and light weight mini-splicer. Improved immunity to ambient conditions and slide-in modular powering units (including battery) provide unprecedented mass fusion splicing capability in remote and outdoor splicing locations. The FSM-30R12 takes mass fusion splicing productivity to a new plateau with 12 fiber splicing time cut to one third that of previous generation mass splicers. The tube heater for heat shrink splice protection sleeves is twice as fast as the previous generation. The FSM-30R12 is the ideal mass fusion splicer for any application.

This system has the following features:

  • Best mass fusion splice loss performance in the industry, including splicing non-zero dispersion-shifted (NZ-DS) fibers

  • Maximum productivity with much faster splicing than previous mass fusion splicer: 30 second splicing time

  • New wind protector design withstands 30mph cross wind

  • Unprecedented utility in exposed conditions

  • Splices up to 12 fibers simultaneously

  • Ultra small and lightweight design; ideal for remote/outdoor splicing scenarios

  • Built-in programmable tube heater

  • Slide in power modules include AC adapter, battery, or camcorder battery adapter

  • Automatically adjusts fusion arc to compensate for cold temperatures, as well as differences in atmospheric pressure

  • Simultaneous focus on all 12 fibers and large image magnification on a low glare 5" color LCD monitor provides great fiber visibility

  • Great mass fusion splicer capacity under battery power

This system has the following specifications:

  • Applicable fibers SM (Single-mode), MM (Multi-mode), DS (Dispersion shifted) and NZ-DS (Non-Zero Dispersion shifted) fibers

  • No. of fibers to be spliced: Single, 2, 4, 5, 6, 8, 10 and 12 fibers, irrespective of ribbon or bundle configurations.
    Actual average splice loss: Typical 0.05dB with SM fiber, Typical 0.03dB with MM fiber, and Typical 0.08dB with DS fiber

  • Splicing time: Typical 35 seconds
    Return loss: > 60 dB

  • Fiber cleave length: 10 mm each

  • Fiber observing direction: X and Y (2 axes)

  • Fiber viewing method: 5" TFT color LCD monitor with anti-reflection coating

  • Splice loss estimating function: SM, MM and DS fibers

  • Number of splice modes: 30 programs

  • Storage of splice results: The last 150 splices including estimated loss, selected splice mode, arc condition and comment

  • Mechanical proof test: Approx. 2N

  • Applicable protection sleeve length: 40 mm and 60 mm

  • Number of splicing and heating cycles with BTR-05: Approx. 30 cycles with using power saving function of FSM-30R and HJS-02

  • Includes a carrying case, shoulder strap, magnifying lens, HJS-02 Hot Stripper, and a BTR-04 battery.

 

 

Fujikura Fusion Splicers

FSM-11S Splicing Kit

FSM-11S Splice Mate

FSM-15SA
FSM-15S

FSM-16S
FSM-16R

FSM-17S Mini Fusion Splicer (Kit)

FSM-17FH

FSM-17R

FSM-20RSII12
FSM-20RS12
FSM-20R8

FSM-20PMII
FSM-20C

FSM-20CS

FSM-30S
FSM-30R
FSM-30F

FSM-30S-K

FSM-30R12

FSM-40F

FSM-40PM

FSM-40R24

FSM-40S

FSM-40SB

FSM-40R

FSM-41S

FSM-50R
FSM-50R12

FSM-50S

FSM-60S
AFS1000

 
 

Copyright 2008 FusionSplicerOTDRStore.com. Designated trademarks and brands are the property of their respective owners.